GEL APPLICATOR (B)
- Product Description
- Specification
- Application
- Diagram
- Manual
- Training Videos
Airofog Gel Gun is designed by the theory of negative pressure. Gel bait is sucked out through the gun instead of being pushed out in the traditional way by a plunger, ensures an accurate amount of each bait placement and avoids an overflow of gel bait. By adjusting the wheel regulator, 5 different doses can be selected to meet a variety of demand. Adapts to most 30g/35g gel cartridges.
It matches up with 30-35g industry standard gel tubes. Two calibrations are supplied, which are differentiated by red and black color.
Dosage reference
Airofog Gel Gun is designed by the theory of negative pressure. Gel bait is sucked out through the gun instead of being pushed out in the traditional way by a plunger, ensures an accurate amount of each bait placement and avoids an overflow of gel bait. By adjusting the wheel regulator, 5 different doses can be selected to meet a variety of demand. Adapts to most 30g/35g gel cartridges.
Safety
● Keep out of reach of children
● Never inject the metal tip/needle of the gun into electric outlets
● Not to touch the exposed cables or electric outlets with the gun’s metal part especially in the thunder weather
● Follow the manufacturer’s instruction for the safety of gel cartridge
Getting Started
Step 1: Remove the closure (18) and place a stainless steel or plastic needle (19).
Step 2: Remove the tip cover of gel cartridge, then insert the cartridge into the gun compartment by pushing it against the piston (12) until the base of cartridge is seated well on the top hook of the trigger (3).
Step 3: Adjust the regulator (4) to position 5. Push the gel bait plunger gently from the base of the cartridge to drive the gel to the outlet, then press repeatedly the trigger until the gel comes out.
Step 4: Now the gun is ready for application.
Step 5: Dial the regulator to the position from 1 to 5 to get the desired dose.
After Using
● Take off the needle (19) from the gun, screw back the closure (18) to the gun to prevent the drying of gel at the output
● Dial the regulator to “0” position to avoid trigger pressing by accident
● Leave the gel cartridge into the gun compartment to prevent the gel left inside the gun from drying then blocking the piston and other gun parts
● If necessary, clean the used needles with the cleaning rod
● Put the gun and parts back into the provided pouch
Airofog USA Gel Gun Diagram & Part List
Airofog USA Gel Gun Part List
