Pro 1 Gallon Compression Sprayer - 501-504-210
- Product Description
- Specification
- Application
- Diagram
- Manual
- Training Videos
Choose Airofog PCO series sprayers, and experience the quality and durability of these beautifully engineered sprayers
Airofog PCO sprayers are designed for the professional pest control operator to deliver outstanding performance.The sprayers are finished to a very high standard and present a highly professional appearance to clients. All wetted parts are made of chemical resistant materials such as Viton TM , Teflon TM , high grade stainless steel, brass, and other engineered materials. A cable-operated DRIP-FREE nozzle shut off actuated by the trigger valve provides maximum operator safety and environmental security. The trigger valve can also be simply locked on or off for added safety.
1/2 Gallon |
1 Gallon |
1 1/2 Gallon |
|||||
Working Capacity |
0.5 US gal. |
1 US gal. |
1.5 US gal. |
||||
Tank Volume |
/5 Gal.1 |
1.1/2 Gal. |
.4/5 Gal. |
||||
Tank Material |
Stainless Steel AISI 304 |
||||||
Max. Working Pressure |
90 psi |
||||||
Pressure Relief Valve |
60 psi |
||||||
Pressure Gauge |
0-100 psi |
||||||
Pump Handle |
brass, D-type |
||||||
Pump Cylinder |
AISI 304 with VitonTM check-valve |
||||||
Spray Hose |
48 in |
||||||
Trigger Valve |
brass, drip-free (DFC) type with lock-on & lock-off fatures |
||||||
Spray Lance |
AISI 304; DFC: 9" or 18" |
||||||
Nozzle |
DFC/HD: 4-way multi-nozzle or even flat fan nozzle 8002E; HD: adjustable cone nozzle |
||||||
Carrying Strap |
single shoulder strap |
double shoulder strap |
|||||
Service Kit |
supplied as standard: pump kit, trigger valve kit, seal/gasket kit |
||||||
Tank Dimensions |
Ø6.7 x H7.3 in |
Ø6.7 x H11.2 in |
Ø6.7 x H14.2 in |
||||
Total Height |
10.6 in |
14.6 in |
17.5 in |
||||
Net Weight 5 |
.72 lbs. |
6.82 lbs. |
8.14 lbs. |
Cleaning the Sprayer
● Rinse tank thoroughly with water
● Add water and detergent to the tank
● Attach pump cap and tighten it
● Shake vigorously to clean inside of tank
● Pressurize the tank
● Flush the hose and trigger valve
● Empty the tank and refill with clean water
● Flush the hose and trigger valve once more
● Empty remaining water
● Sprayer should be cleaned thoroughly weekly
Pump & Trigger Valve Maintenance
● Piston o-ring and trigger valve o-ring should be greased every 90 days
● Lightly grease threads on the inside of the filler cap with marine or automotive grease every 90 days
● Check valve at the bottom of the pump cylinder for wear or loose fit. This valve prevents liquid from entering pump. If Liquid is leaking into pump, valve should be replaced
After Every Use
● Empty tank
● Drain the hose and lance
● Carefully inspect all gaskets and hoses as well as the other fittings for wear
● Replace any worn parts as necessary
Clogged Nozzle and Extension Straw
● DO NOT insert metal objects into tip
● Clean with soft bristle brush to free clogs
● Detergents or solvents can be used to soak tip
● DO NOT use ammonia; it can corrode brass
● Run warm water over and into extension straw
● Blow compressed air through the back of the nozzle and extension straw
● Remove strainer housing to access the strainer replace strainer and wash out the housing
Airofog USA Pro 1.5 Gallon Sprayer Diagram & Part List
Airofog USA Pro 1.5 Gallon Sprayer Accessories List
Airofog USA Pro 1.5 Gallon Trigger Diagram
Airofog USA Pro 1.5 Gallon Wand CC Tips