Acid resistant - Perfect for Applying Acid Solutions !

Airofog thermal foggers use the “pulse jet principle” of igniting fuel through a tuned resonator  tube, which allows for continuous engine operation without any moving parts. Here, the exhaust gasses are mixed with a diluent containing the fogging material to create a dense fog of finely atomized particles, typically ranging between 3-10um in size. Oil-based dialects are typically used for fogging insecticides targeting flying insects, stored product pests, insect larvae on water surfaces, and also in the application of biocides and disinfectants in both indoor and outdoor environments. The professional design makes the exit temperature at the point of injection only between 40-60℃, with an exposure interval of under 5 milliseconds to ensure even heat sensitive materials, such as biological products like Bacillus thuringiensis israelensis (Bti) or sphericus (Bts) can be applied. 

This range of Airofog thermal foggers is independently evaluated as compliant with EC council Directive 2004/108/EC Electromagnetic Compatibility.  
AR35E AR9E, AE35E and AE9E are certified by the internationally recognized test center to be fully compliant with all requirements of the WHO Equipment for Vector Control  Specification Guidelines WHO/HTM/NTD/WHOPES/2010.9 REVISED EDITION 2010.

German Engineering!

The Airofog thermal fogger model AT35(E) and AT9(E) operate on the pulse-jet principle. Air and fuel mixture from the carburetor is ignited in the combustion chamber then expels the exhausted gasses through resonator tube in a lower frequency pulse. At the end of the resonator, a fogging solution is injected into the exhausted gasses and atomized into fine aerosol droplets to create a fog. As the exhausted gasses are expelled, cold air is drawn in along the length of resonator tube through cooling jacket, temperature is low at the injection point of fogging solution at around 40~60 degree celcius and exposure time only 4-5 milliseconds, so active ingredients in the fog solution are not adversely affected by heat.

● Cooler burning, oil or water based p[roducts, easy to start
● Flow rate 3-11 gallons per hour, depending on injector nozzle used
● No Spark plug or Carburetor
● Perfect for oil or Water based products, can be used with disinfectants, fungicides,
● Micron range 3-9 microns
● Lightweight patented technology

Airofog thermal fogger use the pulse jet principle of igniting fuel through a tuned resonator tube that allows for continuous engine operation without any moving parts where the exhaust gasses are mixed with a diluent containing the fogging material to create a dense fog of finely atomized particles typically in the range 3-10um in size with oil based diluent for fogging of insecticides against flying insects, stored product pests, insect larvae in water surfaces and also application of biocides and disinfectants in both outdoor and indoor environments.